Especificaciones Icom IC-910H

General

Frequency coverage (Differs according to version)	U.S.A. version: Tx: 144–148, 430–450, 1240–1300*1 MHz Rx: 136–174*2, 420–480*2, 1240–1320*1 MHz Europe version: Tx/Rx: 144–146, 430–440 1240–1300*1 MHz
Modes	USB, LSB, CW, FM, FM-N (FM-N is not available in 1200MHz band)
Frequency stability	±3ppm (–10°C to +60°C; +14°F to +140°F)
Maximum current drain	23A at 13.8V DC
Power supply requirement	13.8V DC ±15%
Antenna connector	144MHz SO-239 (50Ω) 430 (440) MHz Type-N (50Ω) 1200*1MHz Type-N (50Ω)
Number of memory channels	328*1 (99 regular, 6 scan edges and 1 call for each band plus 10 satellite memories)
Dimensions (W×H×D; Projections are not included)	241×94×239 mm; 91⁄2×311⁄16×913⁄32 in
Weight (approx.)	4.5kg; 9.9lb (IC-910H) 850g; 1.9lb (UX-910)

Transmitter:

Output power	144MHz 5–100W 430 (440) MHz 5–75W 1200MHz*1 1–10W
Spurious emissions	Less than –60dB (144/430MHz) Less than –50dB (1200MHz*1)
Carrier suppression	More than 40dB
Unwanted sideband	More than 40dB
Microphone connector	8-pin connector (600Ω)

Receiver:

Sensitivity (typical) Preamp ON SSB, CW, RTTY, AM: at 10dB S/N FM, WFM: at 12dB SINAD	SSB, CW: 0.11μV FM: 0.18μV
Selectivity	SSB, CW: 2.3kHz/–6dB 4.2kHz/–60dB FM: 15kHz/–6dB 30kHz/–60dB FM-N: 6.0kHz/–6dB 18kHz/–60dB
Spurious and image rejection	More than 60dB (144/430MHz band) More than 50dB (1200MHz band*1)
AF power (at 10% distortion with an 8Ω load)	More than 2.0W
External speaker connector	2-conductor 3.5 (d) mm (1⁄8″)/8Ω × 2 (for Main and Sub bands)

_____________________________________

Volver:

Menu principal

Equipos

______________________________________